Search

50 nm ceramic membrane and 100 kD and 10 kD organic membrane were used to separate the reconstitution tobacco extract, the obtained fractions were analyzed by GC-MS analysis, principal component analysis of volatile components, evaluation cigarette paper flavoring, and particle composition analysis of flavoring cigarette smoke. The results showed that 68, 45, 45, 7 and 36 volatile components were detected in the unseparated component ( M0), 50 nm ceramic membrane interception component (M2), 100 kD organic membrane interception component ( M4), 10 kD organic membrane permeation component ( M5) and 10 kD organic membrane interception component ( M6), respectively, and the total volatile components were 1 109.03 µg/mL, 1 042. 14 µg/mL, 828. 02 µg/mL,92. 00 µg/mL,762. 42 µg/mL, widely existing in the five components were nicotine, 2,2'-meth-ylene bis-(4-methyl-6-tert-butylpheno. The unique components of M5 were 2-ethylhexanol and cis-1-(cyclohexylm-ethyl) -4-ethyl cyclohexane. The results of principal component analysis of M5 component were similar to M2 to a certain extent, but there were obvious differences with the other three components. The main components that affected the flavor of M5 were 2-ethylhexanol, cis-1-(cyclohexylmethyl)-4-ethyl cyclohexane. When M5 were added to cigarette paper, the sensory evaluation effect of cigarette was the best, the phenolic, alkane and benzene components in the smoked significantly increased, and the individual flavor components ( such as methyl cyclopen-taenol ketone, (+)-vanorene, etc. ) also increased, which had a significant flavoring effect. [ABSTRACT FROM AUTHOR]

Using chitosan as the wall material, sweet orange oil as the core material, and sodium tripolyphosphate (TPP) as the cross-linking agent, the sweet orange oil nanocapsules were prepared by the complex aggregation method. Through single factor test and orthogonal test, the process conditions were optimized, and the evaluation of particle size and distribution, surface structure, physical stability, thermal stability and embedding situation of sweet orange oil nanocapsules were analyzed. The results showed that the optimal process conditions for preparing sweet orange oil nanocapsules by complex aggregation method were chitosan mass concentration 1. 8 mg/ mL, tween 20 mass concentration 1. 2 mg/ mL, and sweet orange oil mass concentration 3. 6 mg/ mL; The average particle size of the sweet orange oil nano-microcapsule emulsion prepared under the optimal conditions was about 500 nm, showing a normal distribution, and the emulsion had good physical stability. The orange oil nano microcapsule had good thermal stability. Infrared spectroscopy showed that orange oil was successfully embedded in chitosan. [ABSTRACT FROM AUTHOR]

To investigate the effect of heat aging time on the flavor components of tobacco sheet concentrated liquid, firstly, the concentrated liquid was treated at the constant temperature of 70? for 24 h, 48 h and 72 h, respectively, then the routine chemical components (total sugar, amino acid, reducing sugar and nicotine) were determined and the flavor compositions were determined by GC-MS. The results showed that, after heat aging treatment, the mass concentration of total sugar, amino acid and reducing sugar decreased, while there was no significant change in nicotine massconcentration, and the massconcentration and type of flavor composition increased. The optimal treatment time was 48 h, and at this time, the concentrations of alcohol, acid, esters, ketones and aldehydes compounds in the concentrated liquid were 143.47 times, 26.10 times, 1.62 times, 2.92 times and 15.76 times those concentrations in the original liquid. The total amount of flavor compositions were 44 kinds, and the total mass concentration was 891. 79 µg/mL. [ABSTRACT FROM AUTHOR]

Adsorbents featuring abundant binding sites and high affinity to phosphate have been used to resolve water eutrophication. However, most of the developed adsorbents were focused on improving the adsorption ability of phosphate but ignored the effect of biofouling on the adsorption process especially used in the eutrophic water body. Herein, a novel MOF-supported carbon fibers (CFs) membrane with high regeneration and antifouling capability, was prepared by in-situ synthesis of well-dispersed MOF on CFs membrane, to remove phosphate from algae-rich water. The hybrid UiO-66-(OH) 2 @Fe 2 O 3 @CFs membrane exhibits a maximum adsorption capacity of 333.3 mg g -1 (pH 7.0) and excellent selectivity for phosphate sorption over coexisting ions. Moreover, the Fe 2 O 3 nanoparticles anchored on the surface of UiO-66-(OH) 2 through 'phenol-Fe(III)' reaction can endow the membrane with the robust photo-Fenton catalytic activity, which improves long-term reusability even under algae-rich condition. After 4 times photo-Fenton regenerations, the regeneration efficiency of the membrane could remain 92.2%, higher than that of hydraulic cleaning (52.6%). Moreover, the growth of C. pyrenoidosa was significantly reduced by 45.8% within 20 days via metabolism inhibition due to membrane-induced P-deficient conditions. Hence, the developed UiO-66-(OH) 2 @Fe 2 O 3 @CFs membrane holds significant prospects for large-scale application in phosphate sequestration of eutrophic water bodies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)